Custom Adhesive Products – Maximising Effectiveness


It goes without saying that if you have made the decision to invest in custom adhesive products, they are most likely for a purpose of importance.  After all, if the task at hand were relatively insignificant, you would probably pick up a generic adhesive product from a standard store.  By contrast, if you are working directly with the UK’s very best 3M preferred tape convertors, it no doubt means that you have something important in mind for the products.  Which in turn means that it simply makes sense to ensure you get the maximum possible effectiveness from the adhesive products you buy.

These days, getting hold of custom adhesives for largely any purpose whatsoever has never been easier.  Not only has the Internet made it simpler and more convenient than ever before to reach out to custom adhesive manufacturers, but there are likewise more such companies and suppliers in business than ever before.  Of course, ensuring you work with only the most reputable and capable service provider in the first place is of the utmost importance, but so too is the way in which you use, handle, store and generally work with the products themselves.

So if you are currently working with a custom adhesive product or intend to place an order in the near future, here’s a brief overview of just a few guidelines for maximising effectiveness:

1 – Built for Purpose

First up, making sure every key box is ticked by way of the primary properties of the adhesive use of the utmost importance for obvious reasons.  When you commission the creation of a custom adhesive product, it is you and you alone who gets to decide exactly what it does, how it works, how it can be used, its limitations and so on.  As such, you need to ensure you communicate all of this key information to the manufacturer of the product, in order to ensure that the adhesive is perfectly suited to its intended purpose.  If you have any doubts or questions, consult with the professionals before placing your order.

2 – Surface Preparation

When the adhesive products are put to use, it is of the utmost importance to read the instructions provided and pay close attention to surface preparation guidelines.  More often than not, it will stay quite clearly that you need to make sure the surfaces to be joined are flawlessly clean, dry and smooth.  In other instances however, it may be necessary to slightly roughen the surface with sandpaper before applying the adhesive.  In all instances, it is advisable not to simply take things for granted, but to find out exactly what the manufacturer has to say about surface preparation.

3 – Storage Conditions

Likewise, there will be very specific instructions supplied with the custom adhesive product with regard to how it should be stored.  Depending on the exact type of adhesive products you order and their unique properties, ideal storage conditions in terms of temperature, humidity and so on may be somewhat different.  To store an adhesive product somewhere unsuitable is to compromise its ability to do its job properly.  So once again, rather than simply making assumptions with regard to storage conditions, find out exactly how you should be storing your adhesives.

4 – Curing Time

It may seem like a relatively obvious guideline on the surface, instructions and recommendations with regard to curing (drying) times are also often overlooked.  The simple fact of the matter is that if you do not give the adhesive product sufficient time to cure, it is not going to be able to do its job properly.  It will clearly state in the usage instructions exactly how long the adhesive you are using needs to reach its maximum strength – ensure that these instructions are followed to the letter.

5 – Product Age and Condition

Regardless of the exact specifications or quality of the adhesive product you purchase, it will inevitably have something of an expiry date after which its quality and condition may deteriorate.  It’s important to be aware of the fact that these guidelines are not issued just for the sake of it, but serve as a warning that to overstep the mark in terms of product age can lead to poor performance.

It’s also important to bear in mind the fact that largely every adhesive product on the market will have an expiration date and certainly an expiration period after the container has first been opened.  It is of the utmost importance to pay close attention to these as just as soon as any such products begins approaching its expiration date, it cannot be expected to do its job with full effectiveness and efficiency.

6 – General Product Quality

Last but not least, it’s also worth bearing in mind the fact that the overall quality of the products you purchase in the first place will have the biggest impact of all on its effectiveness.  There is a reason why certain adhesive products are literally given away for pennies, while other attach significantly higher price tags.  It’s not to say that you absolutely have to pay excessive prices for quality adhesive products – it’s simply a case of accepting the fact that you cannot realistically expect to pick up the best in the business for next to nothing.